The best color that reflects heat 94.2%, helping you save more than 25% on electricity bills. The color film can be wiped clean. and excellent surface protection with Titanium dioxide from USA. Can be used both outside and inside
Feature : "Cool house paint, save electricity, can be wiped clean" Water-based topcoat Grade : Premium Application area: 30 - 40 square meters, can mix colors from Beger Color Design Mixing Center, heat-reflecting
Feature :
properties > 94.2 % is insulated, so you can save up to 25% on electricity, UV protection, make your home look like new always. Excellent surface coverage Prevents and inhibits mold and algae No mercury and lead .
Innovation, innovation of ceramic microsphere.That NASA used as a heat shield for the space shuttle. It looks clean, hollow, round. The smoothness helps to reflect heat.Hollowness is like heat protectant.Roundness makes every molecule packed.Effective heat protection
Allow the cement surface of dry complrtery for at least 1 month and have less than 14% moisture content.
Old cement surface :
scrub the old pain that has deteriorated. The fungal area Or moss must be scrubbed with Bayer Mouldfree M 001.
Caution :
Before painting every time. Must clean the surface to be free of dust, cement fragment or may use sandpaper to scrub the dust off first. Including grease and dirt stains
Repair cracks on the surface with Putty Beger Acrylic Filler No.200
Step 2 Primer painting
New cement surface :
pain a new alkali-resistant cement primer. (Heat protection) Beger Cool All Seasons No. 6000 amount 1 coat, leave to dry at least 2 hours before applying topcoat. Or for maximum heat protection performance, choose a new elastomeric alkali resistant cement primer. (High heat protection) Beyer Cool Flex No.9000,1-2 coats, leave to dry at least 3 hours before painting the topcoat.
Old cement surface :
Apply one coat of Beger Multi-Purpose Cement Primer B-1900,leave to dry for at least 6-8 hours. It is recommended to apply over it with a new elastomeric alkali resistant cement primer. (High heat protection) Beyer Cool Flex No.9000,1-2 coats, leave 3 hours before painting the topcoat.
*In case the cement surface has a moisture content of more than 14% but not more than 35%, it is recommended to use a moisture-proof cement primer. Bayer Water Block No. W-010 Apply in the first layer and let it sit for 3-4 hours, followed by an all-purpose mortar primer. Beger Ultra Hyde Primer No. B-2100 and let it sit for 6-8 hours, then paint a 100% acrylic topcoat.
Step 3 Paint the topcoat
Apply 100% pure acrylic water-based paint (semi-gloss) Beger Cool Super Ceramic Shield, 2 coats, leaving a period for the first coat to dry for 2-3 hours before applying over coats. next